Commercial Roof
Inspections & Testing
Our independent building enclosure professionals address complete roofing systems, including the supporting structures and integration details that tie in with enclosing or perimeter elements.
Roofing System Specification
Roof ASTM Compliance
Diagnostic & Final Inspections
Root Cause Leak Detection
Nuclear Roof Moisture Surveys
From Plan to Completion, We Have Your Roof Covered
Pre-Construction Phase
Our building envelope specialists review your design plans and evaluate the integrity of the proposed roofing system and perimeter elements.
Construction Phase
Our team works alongside you, your architects, and your contractors, performing inspections to meet applicable ASTM standards.
Maintenance Phase
Routine inspections from our building envelope specialists helps ensure you get the longest life from your commercial roofing system.
Emergency Inspections
If your roof fails, we can conduct comprehensive emergency inspections to detect the root cause and propose a solution.
Expert Testing to Professional Standards
Our commercial roof inspection & testing services cover the following ASTM standards:
ASTM C1153
Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
ASTM D7877
Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
Building Envelope Solutions Made Simple
Complete Inspection & Testing Packages for Better Performance
Ensure quality and efficiency with our bundled service packages.
Roof Warranty
Inspection Package
An independent review of your roofing system to determine if the installation provides a waterproof barrier that meets warranty requirements.
INCLUDES:
- Visual inspection during roof installation
- Visual inspection after roof installation
- Detection of leak entry points roofing contractors may have missed
RESULTS:
- Fulfill warranty compliance requirements
- Verify system is installed properly
- Verify installed system is maintained in warrantable condition
ASTM STANDARDS:
ASTM C1153
Installation Quality
Assurance Package
Air and water leakage testing on the roof, walls, and windows to ensure the installation meets design criteria and applicable building standards.
INCLUDES:
- Whole-building testing to verify all components meet design criteria (including air barriers, curtain walls, façades, roofs, walls, and windows)
- Early and constant testing throughout construction
RESULTS:
- Verify installed components meet air, water, and other relevant building standards
- Verify finished product will meet owner/contractor expectations
ASTM STANDARDS:
AAMA 501.2, ASTM C1060, ASTM C1153, ASTM C1715, ASTM E330, ASTM E331, ASTM E779, ASTM E783, ASTM E1105, ASTM E1186, ASTM E2128, ASTM D7877
Commercial Roof Inspections & Testing FAQs
When do I need a Nuclear Roof Scan versus an Infrared Roof Scan?
Nuclear Roof Scans are typically used when the roof membrane is covered with overburden. This can be ballast (rock), pavers and or vegetative covering.
How long should a new roof last?
This depends on numerous factors. The life of a roof can be extended by routine inspections and maintenance. Is can be decreased by abuse, excessive foot traffic, HVAC service and a lack of preventative maintenance. Different types of roofing systems have vastly different life expectancies.
How does an Infrared Camera find water?
Contrary to belief, IR cameras do not detect moisture. They show a thermal image of the temperature of the substrate being scanned. Since wet building materials are more dense than dry materials (of the same content), the wet areas absorb energy and release stored energy slower than dry materials. Due to this factor, the wet materials are generally indicated as cooler in the infrared image.
Inquire About Commercial Roof Inspections and Testing
"*" indicates required fields
"*" indicates required fields